Through Bolt Threaded Anchors

Spit Fix Through Bolt Anchor

Spit Fix Through Bolt Anchor

[ back to index ] [ image ] [ description ] [ data ]

spit fix through Bolt Anchor

Description

Substrates

  • Concrete
  • For non cracked concrete

Typical Applications

  • Stone cladding brackets
  • Windposts
  • Brick ties
  • Pallet racking and guards
  • Lift rails
  • Stadium seating
  • Brick support system

Product Advantages

  • Load assisted through fixing
  • Anti-rotation expansion sleeve
  • Drill bit required is same diameter as anchor
  • Chamfered head to protect the threads during installation
  • Expansion sleeve design ensures maximum expansion

Specification

Spitfix Torque controlled expansion anchor, installed by hammering the bolt through the fixture. Expansion clip profile ensures the anchor pre-grips the hole surface prior to setting. Tightening the anchor, the body pulls into the expansion sleeve, expanding the clip. The anchor exerts a clamping force onto the fixture, securing it against the surface of the substrate.

Bolt grade S 300 Pb NFA 35561 or FR 28 NFA 35053, expansion sleeve F12T1 NFA 37501 or XE NFA 36401, washer E24 or equivalent to NFE25 - 513, nut grade 6 or 8 NF EN 20898 - 2, zinc plated to 5pm.

Spitfix Stainless Steel

Bolt grade A4 - 0 grade X2 Cr Ni Mo 17-12-2 NF ISO / DIS 3506-1, expansion sleeve A4 grade X2 Cr Ni Mo 17 - 12 - 2 NF EN 10088 - 2, washer A4 grade X5 Cr Ni Mo 17 - 12 - 2, nut grade A4 - 80 grade X5 Cr Ni Mo 17 - 12 - 2 F ISO/DIS 3506 - 2 100 134.

Installation

 

1. Drill the correct diameter hole to the required depth for the Spit Fix selected.

2. Remove debris from hole by blowing out with compressed air or hand held blow out pump.

3. Pre assemble nut and washer.

4. Install the anchor in the hole with a hammer until washer seats on fixture.

5. Tighten bolt with a torque wrench to recommended assembly torque.

Data

Spit Fix Through Bolt Anchor - Zinc Plated
EurocodeDescription Thread Diameter Max Fixture Thickness Overall Anchor Length Anchor/Hole Diameter Min Hole Depth Effective Embedment Box Qty
050510 06-10 - 45M610mm 45mm 6mm 41mm 25mm 100
050520 6 - 20 - 55M620mm 55mm 6mm 41mm 25mm 100
050530 6 - 50 - 85M650mm 85mm 6mm 41mm 25mm 100
050540 8 - 10 - 50 M8 10mm 50mm 8mm 48mm 28mm 100
050550 8 - 25 - 65 M8 25mm 65mm 8mm 48mm 28mm 100
050560 8 - 50 - 90 M8 50mm 90mm 8mm 48mm 28mm 100
050570 8 - 90- 130M8 90mm 130mm 8mm 48mm 28mm 100
050580 10 -10 -60M10 10mm 60mm 10mm 60mm 36mm 100
050590 10 - 25 - 75 M10 25mm 75mm 10mm 60mm 36mm 50
050600 10 - 45 - 95M10 45mm 95mm 10mm 60mm 36mm 50
050500 10 -70 -120 M10 70mm 120mm 10mm 60mm 36mm 10
050610 10 - 90 -140M10 90mm 140mm 10mm 72mm 36mm 50
050620 12 - 10 - 75M12 10mm 75mm 12mm 72mm 45mm 50
056630 12 - 40- 100 M12 40mm 100mm 12mm 72mm 45mm 50
050438 12 - 60 -120M12 60mm 120mm 12mm 72mm 45mm 50
050640 12 - 80 -140 M12 80mm 140mm 12mm 72mm 45mm 50
050650 12-120-180M12 120mm 180mm 12mm 72mm 45mm 25
050660 12-160-220M12 160mm 220mm 12mm 72mm 45mm 25
050670 16 -10 -100 M16 10mm 100mm 16mm 100mm 54mm 25
050680 16 - 45 -125 M16 45mm 125mm 16mm 100mm 54mm 25
050439 16 -65- 145M16 65mm 145mm 16mm 100mm 54mm 25
050690 16 - 95 -175M16 95mm 175mm 16mm 100mm 54mm 10
050730 20 - 20 -120 M20 20mm 120mm 20mm 115mm 74mm 10
050740 20 - 60 -160 M20 60mm 160mm 20mm 115mm 74mm 10
050750 20 -115-215 M20 115mm 215mm 20mm 115mm 74mm 10

 

Spit Fix II Through Bolt Anchor - Stainless Steel A4-316
Eurocode Description Thread Diameter Max Fixture Thickness Overall Anchor Length Anchor/Hole Diameter Min Hole Depth Effective Embedment Box Qty
054270 06-20 - 55 6mm 20mm 55mm 6mm 41mm 25mm 100
054740 8 - 5 - 55 8mm 5mm 55mm 8mm 52mm 35mm 100
054750 8 - 20 - 70 8mm 20 - 7mm 70mm 8mm 52mm 35mm 100
054760 8 - 40 - 90 8mm 40 - 27mm 90mm 8mm 52mm 35mm 100
054780 10 - 5 - 65 10mm 5mm 65mm 10mm 62mm 42mm 50
054790 10 -15 -75 10mm 15 -5mm 75mm 10mm 62mm 42mm 50
054800 10 - 35 - 95 10mm 35 - 25mm 95mm 10mm 62mm 42mm 50
054830 12 - 25 -100 12mm 25 -8mm 100mm 12mm 75mm 50mm 25
054840 12 - 65 -140 12mm 65 - 48mm 140mm 12mm 75mm 50mm 25
054860 16 - 30 -125 16mm 30 - 8mm 125mm 16mm 95mm 64mm 25
*Where there are two figures given, the second is maximum fixture thickness in case of over - embedment